Question 1

What are the entry requirements for CPC40120?

Accepted Answer

To enrol in the CPC40120 Certificate IV in Building and Construction, applicants should meet the minimum age requirement where it applies and complete a Language, Literacy and Numeracy (LLN) assessment together with a short Pre-Training Review. You'll also need a valid Unique Student Identifier (USI) and government-issued photo identification. International students or those on Australian visas may be asked for additional documentation to satisfy visa or study conditions. Our Canberra and Sydney enrolment teams review each application individually and will confirm your eligibility, recommend the most suitable study mode and outline any support services you may benefit from during your qualification.

Question 2

How long does CPC40120 take to complete?

Accepted Answer

The CPC40120 Certificate IV in Building and Construction is delivered over approximately 12 months when studied full time. Your actual completion time can vary depending on the study mode you choose (face-to-face, online or workplace-based), your prior industry experience, any Recognition of Prior Learning (RPL) you're granted, and the pace at which you complete assessments. Students balancing work and family commitments often find the flexible online and workplace-based pathways well suited to their schedule. Speak with an ACTA College enrolment adviser to map out a realistic timeline based on your circumstances, upcoming intakes and preferred campus location.

Question 3

How much does CPC40120 cost at ACTA College?

Accepted Answer

The CPC40120 Certificate IV in Building and Construction is priced at $5,500 for face-to-face delivery and $3,500 for online delivery at ACTA College. Fees are quoted in Australian dollars, are inclusive of learner resources and assessment, and may be subject to change with reasonable notice. Payment plans and eligibility for government-subsidised training or concession pricing can be discussed directly with our enrolment team. We recommend confirming current fees and any available funding pathways — such as ACT Skilled Capital eligibility or employer-funded arrangements — before your enrolment is finalised so you can plan with full confidence.

Question 4

How many units are in CPC40120?

Accepted Answer

The CPC40120 Certificate IV in Building and Construction is made up of 19 nationally recognised units of competency — 11 core units that every student must complete, plus 8 elective units selected in line with the training package requirements. The core units cover building codes, work health and safety, project planning, contract administration and structural principles, while electives focus on estimating, procurement, sustainability and business management. Unit selection may change where permitted under training package transition arrangements. Full details of the units delivered in your intake are outlined in the Course Structure section on this page and confirmed in your enrolment documentation.

Question 5

What study modes are available for CPC40120?

Accepted Answer

ACTA College delivers CPC40120 through three flexible study modes so you can choose the option that fits your work and lifestyle. Face-to-face classroom learning is available at both our Canberra (Belconnen) and Sydney (Ingleburn) campuses, giving you direct access to trainers and peers. Online learning offers self-paced study with structured trainer support, ideal for students in regional areas or juggling other commitments. Workplace-based learning combines study with practical on-site application for eligible students working in a relevant construction role. Many students blend modes across their qualification to suit changing schedules and evolving career needs.

Question 6

Is workplace-based learning available for CPC40120?

Accepted Answer

Yes. Workplace-based learning is available for CPC40120 to eligible students who are actively working in a construction environment where the required knowledge and skills can be observed and assessed. This pathway suits leading hands, site supervisors and tradespeople progressing into leadership roles, as well as apprentices and trainees where an appropriate training contract is in place. Eligibility is confirmed case-by-case and depends on your employer's willingness to support workplace assessment activities. ACTA College does not guarantee placement into a workplace — students must have an existing role — however our team will happily discuss workplace-based learning arrangements with your employer.

Question 7

How is CPC40120 assessed?

Accepted Answer

Assessment for CPC40120 uses a blend of methods to demonstrate both your knowledge and your practical ability to apply it. You may complete practical demonstrations, written assessments, structured projects, oral presentations, observation tasks, knowledge questions and — where applicable — workplace evidence gathered from real construction sites. Assessments are designed to reflect current industry practice and Australian Standards, so what you're assessed on mirrors what you'd be expected to do on site. Trainers will brief you thoroughly on each task, provide guidance on the evidence required, and support you with reasonable adjustments where a legitimate need is identified during enrolment.

Question 8

What career outcomes does CPC40120 support?

Accepted Answer

The CPC40120 Certificate IV in Building and Construction may support progression into a range of supervisory and management-focused construction roles, including Leading Hand, Site Supervisor, Construction Supervisor, Project Coordinator, Estimator and Construction Manager. It's also commonly used by tradespeople working towards state or territory builder licensing requirements. Actual job outcomes depend on your individual experience, existing qualifications, workplace opportunities and any additional requirements imposed by state or territory licensing authorities. ACTA College does not guarantee employment or licensing outcomes, but our trainers draw on industry experience to help you understand how the qualification connects to real-world career pathways.

Question 9

What further study can I do after CPC40120?

Accepted Answer

Graduates of CPC40120 commonly progress to the CPC50220 Diploma of Building and Construction, which builds on planning, management and leadership skills at a higher level and is often referenced by state and territory builder licensing authorities. Depending on your career direction, you may also pursue project management, sustainability, business or leadership qualifications to complement your construction expertise. Our enrolment advisers can help you map a longer-term study plan, factor in any credit transfer or RPL you may be eligible for, and align further study with your career goals. Speak with the ACTA team to plan your next step.

Question 10

How do I enrol in CPC40120 at ACTA College?

Accepted Answer

Enrolling in CPC40120 with ACTA College is straightforward. You can start your application online via the enrolment page, phone our team to speak directly with an adviser, or visit us at our Canberra campus in Belconnen or our Sydney campus in Ingleburn. During the process we'll confirm your eligibility, help you set up or locate your USI, review your preferred study mode and campus, and outline available start dates. If you have prior industry experience or relevant qualifications, we can also discuss Recognition of Prior Learning (RPL) so your existing skills are formally acknowledged before you begin.

Become a Construction Leader with CPC40120 Certificate IV in Building & Construction

CPC40120 at a glance.

Choose how you learn.

Face-to-Face Learning

Online Learning

Workplace-Based Learning

Advance Your Construction Career

Who this qualification suits

Core knowledge and practical skills.

Construction project planning

Site supervision

Building legislation

WHS compliance

Contract administration

Team leadership

Communication

Quality assurance

Risk management

Stakeholder management

Nationally recognised units.

Where CPC40120 can take you.

Site Supervisor

Construction Supervisor

Project Coordinator

Leading Hand

Builder Licensing Pathway

Construction Manager Pathway

Training trusted across the trades.

Nationally recognised qualifications

Experienced trainers

Flexible study

Workplace learning opportunities

Canberra & Sydney campuses

Practical industry focus

Student support

Study at Our Canberra & Sydney Campuses

Canberra Campus

Sydney Campus

A few simple things to have ready.

Minimum age requirement

Language, Literacy & Numeracy

Pre-Training Review

Unique Student Identifier (USI)

Government-issued ID

Visa requirements

How you'll learn and be assessed.

Delivery

Assessment

Continue Your Learning

CPC40120 — answered.

You May Also Be Interested In

Diploma of Building & Construction

Certificate III in Carpentry

Certificate III in Painting & Decorating

Ready to Take the Next Step in Your Construction Career?